Sign in or Register

Fictron Industrial Supplies Sdn Bhd
5-6, Jalan USJ 9/5Q,
Subang Business Centre,
47620 UEP Subang Jaya,
Selangor, Malaysia.
+603-8023 9829
+603-8023 7089
Selangor Office:
36, Jalan Puteri 5/12,
Bandar Puteri,
47100 Puchong,
Selangor.

Penang Office:
44A Jalan Besi,
11600 Green Lane,
Penang, Malaysia.
+604-6192582
+604-6192583

Training

Introduction


These courses aim to introduce participants to repairs of industrial electronic circuits and components. Participants will learn the repairs methods through hands-on testing and experiments. They will be exposed to the theories of industrial electronics repairs and Fictron*s 10 years experience in repairing techniques. Our courses are designed to cater from the novice all the way to the most experienced. Those who pass this course will get an insight of electronic design through the experiments as well. Our satisfactory rate has been over 95% percent so far. JOIN US TODAY!



Key Modules


Industrial Electronic Repair Level 1 will teach a beginner how to use basic equipment to be able to troubleshoot industrial control electronic boards. They will learn about safety of the devices and themselves and will be exposed to a very practical approach towards electronic repair right from the start so they can test each and every component and troubleshoot simple boards upon the completion of the course. The participants will gain a good practical knowledge of soldering, desoldering & maintaining through-hole PCB boards with minimum risks. Click here to download the course material for Industrial Electronic Repair Level 1.

Industrial Electronic Repair Level 2 will teach an electronic technician about advanced methods of repair & equipment in general. Troubleshooting in depth will be discussed along each topic (Analog and Digital Circuitry). Through experiments, they will be experiencing the behavior of each and every component in detail to be able to troubleshoot 'without a schematic diagram' and by only 'observing the damaged circuit's behavior'. The participants will gain a good practical knowledge of SMT soldering, SMT desoldering & maintaining SMT PCB boards with minimum risks. Upon completion of the Level 2 course, they will be able to do repair on PCB tracks as well. Click here to download the course material for Industrial Electronic Repair Level 2.

Comprehensive Industrial Electronics Repairs Course is about significantly enhancing the skill set of a beginner or even advanced & experienced repair technician so they feel very confident and comfortable with repairs. This course is about increasing the repair success rate of your technicians while reducing the time spent on troubleshooting.

This course will enable them to repair different types of industrial automation systems and electronic PCB Board without the existence of a schematic. This powerful course will help the technicians draw the schematic in their head by applying different troubleshooting techniques with ease & high effectiveness. Click here to download the material for Comprehensive Industrial Electronics Repairs Course.



NOW, EVERYONE CAN REPAIR LIKE A PROFESSIONAL!


Industrial Electronic Repair LEVEL 1

Duration: 3 Days

Introduction to Electronics: Voltage, Current, Ground, Resistance, Open/Short Circuit.

Electronic Testing Equipment: Multimeter, Oscilloscope:
Voltmeter, Ammeter & Ohmmeter mode.

Electronic components:
Introduction, Identifying and Testing for Faulty Components

Resistors, Color Code, Power Dissipation.
Fuses, Relays and Connectors.
Different Type of Diodes and Test Methods.

Capacitors: Testing, Coding, Safety & Discharging Methods.
Coils, Transformers, Transistors, Integrated Circuit.

PCBs and their Types.
Basic, Rules, Safety & Techniques of Soldering & Desoldering
Cleaning & Maintaining PCB Boards.

Industrial Electronic Repair LEVEL 2

Duration: 3 Days

Introduction to Field-Effect Transistors (FET), Thyristors, Varistors, Loadcell, Current Transformers.

Operation, Testing, Troubleshooting & Repair.
Mastering the Oscilloscope.
Introduction to Schematics, Case Study & Component Functionality:
Rectifier: Half-wave, Full Wave, Regulators.
Various Amplifiers, Op-Amps.
Analog & Digital ICs Circuitry.
Radio Frequency Modulation Method; Transmitter & Receiver.

Introduction to Programmable Logic Controller (PLC):
Structure, Industrial application & Standards.
Processor & I/O Modules.
Programming, Testing, & Repair of Components.
Introduction, Troubleshooting and Repair of Thermostat & Weight Meters.
Techniques and Safety of SMT Soldering and Desoldering.
Printed Circuit Board (PCB) Repair Techniques.


Comprehensive Industrial Electronics Repairs Course

Duration: 5 Days / 40 hours

Introduction to Electronics: Voltage, Current, Ground, Resistance, Open/Short Circuit.

Electronic testing Equipment: Multimeter, Oscilloscope:
Voltmeter, Ammeter & Ohmmeter mode.
Electronic components:
Introduction, Identifying and Testing for Faulty Components
Resistors, Color Code, Power Dissipation.
Fuses, Relays and Connectors.
Different Type of Diodes and Test Methods.

Capacitors: Testing, Coding, Safety & Discharging Methods.
Coils, Transformers, Transistors, Integrated Circuit.
Introduction to Field-Effect Transistors (FET), Thyristors, Varistors, Current Transformers.
Operation, Testing, Troubleshooting & Repair.
Mastering use of oscilloscope.

Introduction to Schematics, Case Study & Component Functionality:
Rectifier: Half-wave, Full Wave, Regulators.
Various Amplifiers, Op-Amps.
Analog & Digital ICs Circuitry (Bias).
Radio Frequency Modulation Method; Transmitter & Receiver.
Structure, Industrial application & Standards.
Programming, Testing, & Repair of Components.
Experiments with Analogue ICs, Voltage Comparatrors, PWM Controllers and etc.
Experiments with Digital ICs, Logic Gates, Counters, Sequencers and Flip-flops.
PLC I/O, Weight Meter, Counter PCB Repair.
Techniques and Safety of SMD Soldering and Desoldering.
Printed Circuit Board (PCB) Repair Techniques.



Who Should Attend



♂ Engineers and technicians whom wish to broaden their knowledge in the field of electronic repairs and design.
♂ Sales, Procurement, Management and non-technical staffs in electronics engineering or electronics supply and trading.
♂ Anyone wishing to learn the fundamentals of electronic testing, design and repairs.

Please note that the entering the Level 1 doesn't require any background in Electronics. For Level 2 however, the participant is required to have either a basic knowledge and experience in the electronics field or pass the Level 1 course first so they can fully benefit from the course.

Comprehensive Industrial Electronics Repairs Course is suitable for anyone who*s willing to repair Industrial Electronic Automation Systems as well as Consumer electronic systems. One whom wishes to broaden their skill set and improve efficiency and effectiveness.

That includes the repair technicians, production line managers, maintenance managers & technicians. They will learn the fundamentals of electronic circuitry repair. Common issues of electronic automation systems and how to fix them in a cause and effect way. They will also learn about SMD soldering in such a way that the end user won*t be able to tell which component on the board has been changed (very neat soldering).



Why FICTRON?



Fictron Industrial Supplies has had extensive experience in repairing industrial electronic Motor Drives, PLC systems, Servo Systems as well as Human Machine Interfaces.

Our Engineers are trained in Germany and we are the authorized repair center for KEB Automation GmbH. As an industrial solution provider, we believe in an open market whereby the repair information is shared for the greater good of industrial electronics and ease of operation for local factories.

Some of our clients have been:
← Intel Corporation Penang
← AMD Corporation Penang
← Lumileds (former Philips) Penang
← PSDC Penang
← & Many more.



Methodology



Theoretical sessions shall be followed by practical sessions with occasional quizzes. At the end of the course, participants will complete a project test kit in guidance of our trainers. We Guarantee your Satisfaction!



Registration



♂ Register For A Training Session With Us Today and Save Your Time and Money!

Training Registration Form can be downloaded HERE:

After filling the form, please kindly e-mail/fax it to: amin@fictron.com

FAX: +603 8023 7089

If you have any further questions, please don't hesitate to contact us: +603 8023 9829 / 8639

Like our FACEBOOK PAGE and get 2% DISCOUNT!



Training Dates For 2019


LEVEL 1
Month Day:
JANUARY 8th 每 10th 15th 每 17th 22nd 每 24th 29th 每 30th
MARCH 5th 每 7th 12th 每 14th 19th 每 21st 26th 每 28th
MAY 7th 每 9th 14th 每 16th
JULY 2nd 每 4th 9th 每 11th 16th 每 18th 23rd 每 25th
SEPTEMBER 3rd 每 5th 10th 每 12th 17th 每 19th 24th 每 26th
NOVEMBER 5th 每 7th 12th - 14th 19th 每 21st 26th 每 28th


LEVEL 2
Month Day:
FEBRUARY 12th 每 14th 19th 每 21st 26th 每 28th
APRIL 9th 每 11th 16th 每 18th 23rd 每 25th
JUNE 11th 每 13th 18th 每 20th 25th 每 27th
AUGUST 6th 每 8th 13th 每 15th 20th 每 22nd 27th 每 29th
OCTOBER 1st 每 3rd 8th 每 10th 15th 每 17th 22nd 每 24th 29th 每 31st
DECEMBER 3rd 每 5th 10th 每 12th 17th 每 29th









You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version